Close

Jeans and trousers

Lay your jeans flat on a table and take measurements as shown below.

WAIST

Place the measurement tape on the bottom corner of the waistband, where the waistband meets the jeans, and measure across to the other side.

RISE

Place the tape on the front crotch and measure from the waistband edge to the end of the crotch seam

BACKRISE

Place the measurement tape on the bottom edge of the waistband and measure down along the backrise, ending at the edge seam of the crotch.

HIP

Place the tape right below the pocket seams and measure from edge to edge.

THIGH

Place the measurement tape on the highest point of the inner thigh and straight across over to the edge of the thigh.

1.

KNEE

Step one: Measure 35 cm down from the crotch seam along inseam.

2.

KNEE

Step two: 35 cm down from the crotch seam, place the measurement tape across knee point and measure edge to edge.

LEG OPENING

Place your measurements tape over the leg opening and take measurements from edge to edge.

Shirts and jackets

Lay your shirt or jacket flat on a table and take measurements as shown below.

SHOULDERS

Place the tape across the shoulders and measure from edge to edge at the highest point of the shoulder seams.

CHEST

Place the measurement tape across the chest and measure from edge to edge just below the top armpit point.

FRONT LENGTH: Livid

Place the measurement tape right below collar point and measure straight down to hem.

FRONT LENGTH: Vintage

On our vintage items, we measure front length from the top of the shoulder, down to the bottom of the front hem.

ARM LENGTH

Place the measurement tape at the top edge of the shoulder seam and measure down to the end of the cuff.

BOTTOM OPENING

Place the measurement tape across the bottom front hem and measure from side tab to side tab.

Join the community